Front upper strut bar installation diy how-to, Accord 94-97

[TOP END MS]

Product: Tanabe Front Upper Strut Bar
Application: Accord 94-97

1. Raise the front of the vehicle via the jacking points.

2. Remove the 3 upper shock tower nuts.

3. Install the strut tower bar over the threads.

4. Reinstall the 3 shock tower nuts and torque to spec.

5. Repeat on opposite side.

6. Tighten the strut bar pre-tension nuts on both sides evenly as much as possible.

7. Lower the vehicle to the ground.

[TOP END MS]

Product: Neuspeed Front Upper Strut Bar
Application: Accord 94-97

1. Raise the front of the vehicle via the jacking points.

2. Remove the front anchor bolt nut and the inside shock tower nut on both sides.

3. Install the strut tower bar over the threads.

4. Reinstall the nuts and torque to spec.

5. Lower the vehicle to the ground.