Classified Ads
    1990-93
    1994-97
    1998-02
    2003-UP

Discussions
    Events/Meets
    General
    Opinions
    Racing

Member Rides
    1990-93
    1994-97
    1998-02
    2003-UP

Parts Guide
    Engine
    Exterior
    Interior
    Stopping Power
    Suspension

Tech Support
    1990-93
    1994-97
    1998-02
    2003-UP

e-Manage (piggy-back fuel computer)

e-Manage is an inexpensive programmable fuel management system that allows you to properly tune your factory fuel system, without having to change the entire factory ECU system to an expensive "stand-alone" unit. The e-Manage system is a universal "piggy-back" type unit, which taps into most factory ECU wiring and it still utilizes the existing sensors. Basic functions will allow the user to slightly alter factory injector duty-cycle(± 20% at 5 preset RPM points), by intercepting and altering airflow or MAP sensor signals. For VTEC cars you can adjust the VTEC shift point. Additional features that are built into the system, but are only accessible though the use of our PC-Windows based "e-Manage Support Tool" communication software (Please see our Authorized GReddy Support Dealers for more information) are a 16x16 Airflow Adjustmemt Map, Larger Main Injector correction adjustment, Upgrade Air Flow Meter adjustment, Boost Limiter Cut, Anti-engine Stall, VTEC-fuel adjustment, Real-time Map Trace, Real-time Display, Real-time Communication, and basic Data-logging. With the use of our "Optional Injector Harness" and the software, the unit has the ability to control an additional 16x16 Injector duty cycle Map and the Controls for adding up to 2 Addional Sub-injectors. If the "Optional Ignition Harrness" and the software is used the unit has the ability to control a 16x16 Ignition Timing Map. All of the above Maps can also be Map-traced in Real-time as well. If the factory range of Map or Airflow meter is surpassed, you can incorperate our "Optional GReddy Pressure Sensor and Pressue Harness" to set larger scales of ajustment. All installation and tuning should only be made by a trained techntion with proper Air/Fuel Monitoring tools.

PRofec e-01 (Elec. Boost Controller & e-manage Programmer)

GReddy's new super multi-tasker is the PRofec e-01. Designed as a combination: boost-controller, data display / logger and e-manage programmer, the e-01 can provide superior boost response, increased boost, warning meter functions, 3channel data-logging, and access to all the programming features provided with the latest e-manage support tool. Even when used as just a boost controller the e-01 has features to smooth out the boost curve. With both an Auto and Manual setting for both external and actuator style wastegates, the new PRofec can alter its new compact, high capacity solenoid valve via various RPM ranges if need be. The large LCD screen, with green elecro-illuminesant backlighting is easy to see. Other standard features includes two preset boost levels, a timed over-take boost and compatibility with our Remote Switching System. The data display can view 3 different data channels simultaneously; like Boost, RPM, or any other channel inputted by the emanage. The data can be logged up for 3hours on a SD card while also giving warning set points, and peak & hold values. (Some features require optional harness to be access)

Rebic IV Sub-injector Controller

The Rebic IV is designed to help add additional fuel to any force induction system. Install additional injector(s) on your charge pipe or intake and program the Rebic IV to contorl the new dutty cycle This unit works independently form any other system, this means it can supplement your main system (factory, stand-alone, even carburetors.) Control 1 to 8 sub-injectors, by tuning in a fuel map from three adjustable parameters: Boost, RPM, and Injector Duty Cycle.