TOP END MS
01-03-2007, 12:01 AM
BRAND: VIS Racing
PRODUCT: Carbon Fiber mugen style front grill
APPLICATON: Accod 94-97
http://www.accordracing.com/media/data/618/medium/DSC03686.JPG http://www.accordracing.com/media/data/618/medium/DSC03687.JPG http://www.accordracing.com/media/data/618/medium/DSC03688.JPG http://www.accordracing.com/media/data/618/medium/DSC03689.JPG http://www.accordracing.com/media/data/618/medium/DSC03690.JPG http://www.accordracing.com/media/data/618/medium/DSC03691.JPG http://www.accordracing.com/media/data/618/medium/DSC03692.JPG
BEFORE ..
http://www.accordracing.com/media/data/618/medium/DSC03700.JPG http://www.accordracing.com/media/data/618/medium/DSC03701.JPG
1. Pop the hood. Locate and remove the 5 upper grill mounting screws.
http://www.accordracing.com/media/data/618/medium/DSC03693.JPG http://www.accordracing.com/media/data/618/medium/DSC03694.JPG http://www.accordracing.com/media/data/618/medium/DSC03695.JPG
2. Use a flat head screw driver and unclip the grill from the vehicle.
http://www.accordracing.com/media/data/618/medium/DSC03702.JPG http://www.accordracing.com/media/data/618/medium/DSC03703.JPG http://www.accordracing.com/media/data/618/medium/DSC03704.JPG http://www.accordracing.com/media/data/618/medium/DSC03705.JPG
3. Line the bottom of the new carbon fiber grill with the supplied stick on cushion strips. I suggest outlining the bottom then filling in the middle with 2-3 more strips.
4. The top level mounting locations will not be used with the new grill, so you can remove the plastic screw retainers from there. Then put the grill in place (over the mid-level mounting locations, not the top), check for proper alignment and mark for drilling.
5. Drill two small holes over your markers and install your new Carbon Fiber grill using the two screws!
AFTER ..
http://www.accordracing.com/media/data/618/medium/DSC03706.JPG http://www.accordracing.com/media/data/618/medium/DSC03707.JPG http://www.accordracing.com/media/data/618/medium/DSC03708.JPG http://www.accordracing.com/media/data/618/medium/DSC03709.JPG
PRODUCT: Carbon Fiber mugen style front grill
APPLICATON: Accod 94-97
http://www.accordracing.com/media/data/618/medium/DSC03686.JPG http://www.accordracing.com/media/data/618/medium/DSC03687.JPG http://www.accordracing.com/media/data/618/medium/DSC03688.JPG http://www.accordracing.com/media/data/618/medium/DSC03689.JPG http://www.accordracing.com/media/data/618/medium/DSC03690.JPG http://www.accordracing.com/media/data/618/medium/DSC03691.JPG http://www.accordracing.com/media/data/618/medium/DSC03692.JPG
BEFORE ..
http://www.accordracing.com/media/data/618/medium/DSC03700.JPG http://www.accordracing.com/media/data/618/medium/DSC03701.JPG
1. Pop the hood. Locate and remove the 5 upper grill mounting screws.
http://www.accordracing.com/media/data/618/medium/DSC03693.JPG http://www.accordracing.com/media/data/618/medium/DSC03694.JPG http://www.accordracing.com/media/data/618/medium/DSC03695.JPG
2. Use a flat head screw driver and unclip the grill from the vehicle.
http://www.accordracing.com/media/data/618/medium/DSC03702.JPG http://www.accordracing.com/media/data/618/medium/DSC03703.JPG http://www.accordracing.com/media/data/618/medium/DSC03704.JPG http://www.accordracing.com/media/data/618/medium/DSC03705.JPG
3. Line the bottom of the new carbon fiber grill with the supplied stick on cushion strips. I suggest outlining the bottom then filling in the middle with 2-3 more strips.
4. The top level mounting locations will not be used with the new grill, so you can remove the plastic screw retainers from there. Then put the grill in place (over the mid-level mounting locations, not the top), check for proper alignment and mark for drilling.
5. Drill two small holes over your markers and install your new Carbon Fiber grill using the two screws!
AFTER ..
http://www.accordracing.com/media/data/618/medium/DSC03706.JPG http://www.accordracing.com/media/data/618/medium/DSC03707.JPG http://www.accordracing.com/media/data/618/medium/DSC03708.JPG http://www.accordracing.com/media/data/618/medium/DSC03709.JPG