camber kit ?

[Damo]

i just had put on the ingalls camber kit myself about 6 months ago and havent been able to find anyone who can align them. I've been going to honda car dealerships-they keep telling me they either cant do it or the car is to low.
Even the shops that do have the lifts that my car can get on they say they dont have the knowledge to do it (i say bullshit) car is only 2.5"lowered, and it fits on the lift just fine. If anyone knows of anyone who is able down in the maryland area let me know please-before i f### up my suspension

[matts]

it's a good drive away, but i know lots of people up around the philly area. try checking out big name chains. i know STS tire will do it, just tires probably does too.

[Damo]

cool like where around philly, im willing to make the drive. philly is only bout an 1:30 min from here. its just that theres really no one around here that will do it

[TOP END MS]

Ya, people are just dumb sometimes. Your best bet is to just estimate the camber adjustment on the kit and they can even it out a little from the bottom.

[Damo]

i mean yeah they were really pissin me off but i think what they were gettin at is that even if it was adjusted that the upper control arm would be bumping the wheel wall but even so they could still adjust to at least a -1.0 it may not be a 0.0 but a -1.0 is a hellalot better than a -3.5. but even if it bumps the wheel wall it shouldnt make a difference you can still shave down the upper control arm a bit

[TOP END MS]

If you bought it from them I bet theyd know how to do it.. :mad:

[Damo]

nah i bought the ingalls from extreme motorsports down here they dont have a shop that will put on the items for you the only thing theycan do is maybe put racing decals for you- thats bout it. There kinda new so i guess they gotta start somewhere. I went and asked soe people down here they said that there are a couple of places not car dealerships- but other modify shops that are now putting the roll on lifts in there shops. So ima check those out hopefully i can get results

[matts]

sorry for the delay. there's a place called Mickey's Suburban Allignment in the Lawrence Buisness park in Springfeild PA. i don't have their number or address right now, but i'll get it this weekend. I don't know if you know the area at all, but if you head up 95, and get on 476N, then get off at the rt. 1 exit that'll get you close.
I just had my car done there, with the ingalls front camber kit, and i had him put washers on the back. it'll cost like $65-70, but it's definatly the best around.

[nitrousoxsys]

I'm from Maryland and i got ya the right peoples!! JE Import Perfomance on falls road in Parkton, MD. Look them up in telephone book, They should do it. Thats where i get all my work done. Good luck

[matts]

i knew there'd be a place closer than philly.