New Member

[accordh22kaos]

Hey Guys,
I'm a new member on accordracing.com. I come from vancouver, Bc.
this site is fuckin awsome, i have owned my 94 accord for 2 years but never knew of this site. you guys did a great job creating this one.

here r sum pics of my car http://www.picturetrail.com/gallery/view?p=999&gid=3618616&uid=1717272

Its a 94 accord Exr..f22 has been removed and replaced with the h22a4 Block.

[AccordEx]

Welcome and thats some nice Accord you got there. What are some of your other mods?

[Carreragt2e]

Your car is awesome. Do you have any more interior pics? Colors real clean too. Did you have the whole car sprayed? Nice work man!
eric

[NSXfreak]

Tight setup man. Very clean looking. I like the JDM headlights and the red seats. Looks awesome! ;)

[Infini Omega]

sweet ride bro. i like it alot. anyways welcome to the board

[takezo]

Nice Ride.. !!! http://www.importstreetscenes.com/tech/images/icons/icon14.gifhttp://www.importstreetscenes.com/tech/images/icons/icon14.gifhttp://www.importstreetscenes.com/tech/images/icons/icon14.gif

[accordh22kaos]

Thnxs for all the comments guys. I was going for a clean Classy look on this project, i have never owned an accord before and i am starting to wonder y it took me so long to find this wicked car...as for the ? about my paint, the car came black, i had the body shaved and the kit molded by my uncle, the body needed hours of sanding due to its poor condition when i purchased it. The color is the 2003 BMW 5 series grey, looks light in sunlight but if you saw the pictures the one with my car at the show in the dark, the paint looks even better. The rest of my mods are as follows....

Mods List: H22a4 Block


Port/Polished head
60shot NOS wet system
NOS purge kit
NOS gauge
3 Angle Valve Job
Titanium Retainers
Titanium Valve Springs
Stainless Steel Valves
Iron Sleeved Ducts
Iron Sleeved Bottom End
Arias 9:1 Pistons
Crower Connecting Rods
A&J 74mm Bored Throttle Body
Micropolished Crank
T88 Turbo FMax Downpipe
FMax Manifold
Custom Intercooler piping
Tial Waste Gate
T-Bolt Clamps
Hayame Dress Up Kit
Hayame Cam Gears
Hayame Stage 2 Clutch
B&M Fuel Regulator
AEM Fuel Rail
Apexi purple N1 exhaust
Apexi Blow off Valve
Apexi Skyline GTR Intercooler
Apexi Intake
Weapon-R throttle rotor
Steel radiator hose
440cc Injectors
Hondata Stage 3B
B&M Oil Cooler
Earl's Fuel Line
Earl's Steel Braided Oil Line
Walboro Fuel Pump
Pivot Ground Wire System

[accordh22kaos]

Thnxs for all the comments guys. I was going for a clean Classy look on this project, i have never owned an accord before and i am starting to wonder y it took me so long to find this wicked car...as for the ? about my paint, the car came black, i had the body shaved and the kit molded by my uncle, the body needed hours of sanding due to its poor condition when i purchased it. The color is the 2003 BMW 5 series grey, looks light in sunlight but if you saw the pictures the one with my car at the show in the dark, the paint looks even better. The rest of my mods are as follows....

Mods List: H22a4 Block


Port/Polished head
60shot NOS wet system
NOS purge kit
NOS gauge
3 Angle Valve Job
Titanium Retainers
Titanium Valve Springs
Stainless Steel Valves
Iron Sleeved Ducts
Iron Sleeved Bottom End
Arias 9:1 Pistons
Crower Connecting Rods
A&J 74mm Bored Throttle Body
Micropolished Crank
T88 Turbo FMax Downpipe
FMax Manifold
Custom Intercooler piping
Tial Waste Gate
T-Bolt Clamps
Hayame Dress Up Kit
Hayame Cam Gears
Hayame Stage 2 Clutch
B&M Fuel Regulator
AEM Fuel Rail
Apexi purple N1 exhaust
Apexi Blow off Valve
Apexi Skyline GTR Intercooler
Apexi Intake
Weapon-R throttle rotor
Steel radiator hose
440cc Injectors
Hondata Stage 3B
B&M Oil Cooler
Earl's Fuel Line
Earl's Steel Braided Oil Line
Walboro Fuel Pump
Pivot Ground Wire System

[vasponger]

wow thats an impressive list of stuff ya got there, you gotta be pushing close to 300hp

[accordh22kaos]

286HP at the wheels with 7psi

[Carreragt2e]

Wow, holy freakin crap Im jelous. The only thing you need is to have your tranny built up and your car will rule the day even more than it already does. Word Ive heard is that over 300 and they go to mush. Else it seems like you should be able to boost more than what you quoted. Its good to see someone is actually tuning there car instead of just slapping things together and seeing what happens.

eric

[vasponger]

286HP at the wheels with 7psi

holy crap :cool: thats like............330hp

[NSXfreak]

That's truly awesome man. I don't think you'll be running into tranny problems anytime soon. Many guys in the pro-drag circuit don't do much to their tranny's besides upgrading the clutch.

I know that you've got the thing looking spotless, but have you ever raced it, or considered racing it? Any timeslips?

Anyway, your ride looks tight ! :)

[AccordEx]

damn I wish I had that much HP on my car, I would have though you got at least around 200hp by the look but around 330Hp at the flywheel? wow man, thats just awesome, you dont see many Accords like that.

[accordh22kaos]

To be honest with you i have not once considered putting her on the track. STanding back and loking at it i dont think its practical to ever really race hard, i built it more for style and to be original with the h22 and the turbo. i might one day end up taking my front lip off and running it down the 1/4 mile but not anytyme soon, its fun just to cruise around and get looks. As for my tranny, yeah i wasnt planning on doing a whole lot to it, people have told me the same thing about the tranny's being able to hold good HP before they need to do sum mods to it, so far so good.

[AccordEx]

man I want to hear some of your racing stories, post some