Taking off 95 accord headlights

[95AccordVTEC]

if I want to take off my headlights to paint them, do I need to take off or loosen my bumper? If anyone can help me with some kind of information about how to take out my headlights, I would greatly appreciate it.

if I ever get around to doing it, I'll take pictures and make a how-to page with pictures....just like these two I already did.

How to paint your brake calipers
www.serious-photography.com/calipers/

and how to paint your tail lights
www.serious-photography.com/tails/

I'm working on a big long list of how-to's. My next ones are gonna be the Si-R headlights and cam gear installation if I EVER FIGURE IT OUT! I'm probably going to take it to the shop and ask if I can watch and take pictures, because I can't find anyone or anything that can tell me how. I've only found 2 things - one was cam gear install for a focus zx3 and the other was for my accord, but it was so vague - I need to know how to take off the cam gear cover on the side of the head. Then I can take it from there. SOMEONE PLEASE HELP ME!

[jdmaccordbo!916]

headlight removl is simple bro..... take off corner lights... take out the grill, take off the bumper lights... an remove the two screws fom the bumper where it meets up ith the fender... just inside by the tire.. after you remove the bumper lights, you will see two bolts on eaach side.. remove those... bumper shou drop off after that...... then you remove the six bolts that hold on the lights..two on top two on bottom, an one on each side... should tke around 45 minutes to do or so...

bolts are 10mm on the light
i think bumper is same as well,o is it 3/16 i dont remember
an the screw thing is a phillips or a bolt i dont remember to wel.. you will see...

good luck