my parts have finally arrived

[2DrAccord]

Well guys I'm happy to say that everything that i've ordered has made it to the house. Here's everything that i ordered for the accord. Let me know what you guy's think. I'm really curious to see what she'll run the 1/4 in with all of these parts on.

Engine:
JDM H22 and lsd tranny
AEM cai
Dc sports header
2.5" boucsher racing high flow cat
Universal muffler with custom 2.5" piping
Skunk2 cam gears
Hondata heat shield
Greddy hi pressure radiator cap
Unorthodox pulley's (crank, ps, and alt.)
Crane Cams HI-6s ignition
Crane Cams coil
MSD 8.5 super conductor wires
MSD dist. cap for external coil
NGK iridium spark plugs
act clutch
fidanza 8lb flywheel
moroso oil pan
OBD1 conversion Boomslang

Suspension:
Eibach prokit
Koni red (non-adjustables) (wish i would have ponied up for the yellows)
dc sports lower rear tie bar

Misc:
Autometer lunar gauges Air/fuel and water temp
momo pedals
dc sports short shifter adapter
amberless tailights
kenwood head unit
EBC green brake pads

I didn't realize how much money i've spent on car parts here and there. But now that i put everything i've bought in a list it definitly shows that i've blown too much of my hard earned cash. Oh well, i'll have a pretty damn quick sleeper accord to roam around the streets of pensacola in. No body kit, no stickers, no wing. They'll never know what hit them. Now all i have to is get back to the U.S. and install all of these cool parts. Man is that going to take a while with only me turning the wrenches. Hey everyone.....let's meet up at my place and work on my car. Free beer for everyone! I should have some dyno number's and track times posted really soon aswell.

[jbaccord]

Only on the condition I get the lsd. You are one lucky man. I've got everything you will or an equivelant of except JDM, lsd, and the additional spark. I do have more suspension in the rear with a Suspensions Techniqe Lower rear Sway Bar. You should have no problem with this task before you compared to what you've been thourgh. I have never actually clocked a 1/4 mile time. Roads with lots of curves are our FRIENDS. Gotta ask though, What do you think of this Robot shit? I see some areas of help but....its kinda limited isn't it?

[5peedCoupe]

berry nice.. thats gotta run bout 7g? but anyways.. with the rite tunning and driving.. u be in the 14s.. and if ur lucky high 13s? if u got the rite tires.. and gas

[what?!]

.you'd prolly run lower if you gut your car and get smaller piping. 2.5" is a lil big dont-cha-tink?

[2DrAccord]

7 G's is close. I haven't had the nerve to do a complete price list though. I don't think that I'll like the final number. Oh well, it will be worth it when i start putting the parts on. I bought some Pirelli Pzero nero m&s tires, I haven't had any experience with pirelli tires so i hope they'll grip. I think that the 2.5 inch exhaust will be alright. I'm not building this motor for a lot of high end power, i want a lot of low end grunt. I kinda wished that i would have went ahead and bought an h23. Oh well, i just wish someone would release a supercharger that would work with our swap without haveing to cut out he firewall and some of the shock tower. I would be on that like a pizza at a jenny craig convention. I've said this before, but i'm not going to stop modding the accord until i've dipped into the 13's with it. If my current set up doesn't get me there, i've got my eye on the new crower stage two cams, and a fuel pressure regulator. That should assure my place in the 13's.

I don't really know what to think about the new "swords" robots. From what i've heard they are deadly accurate. At a range of 250 meter's they can hit a nickle 72 times out of 72. The last i heard they where deploying a unit of swords to iraq to conduct recon missions. So we will see how well they preform. I think that these have a lot of benifits, but also alot of downfalls. Benefits being lack of humans dying, on our side at least. Downfall's being cost. Sorry too be so blunt, but if one of us die's in combat it cost's alot less to replace us. What are we really worth financially? 200,000 for our life insurace? how about couple million for one machine. Oh well, we'll see. It was bound to happen eventually.

[BandAid117]

you didnt buy all that shit in one go did you???

[birdman]

nice H22 performance parts list u got going on. U sure going for 14's w/ all that, at least. I see u got the boomslang fabrication obd1 conversion harness. pretty dope looking huh? I can't wait for u 2 install all that shizz and post some pics of them in there.

[2DrAccord]

Nah, i've been just buying things here and there ever since i've been over here. I probably could have gotten things alot cheaper if i had ordered everything at the same time, but i needed something to keep my attention while I'm deployed. Speaking of being deployed I AM LEAVING FOR THE UNITED STATES TOMMOROW! I will be on a plane heading for Ft. Stewart Georgia. Yeah! i can't wait. Only a week away from installing my h22!
I can't wait too see what my boomslang obd1 adaptor looks like. I was really surprised at how cheap they were selling it. Everyone says that it's a good product so i went ahead and bought it. Don't worry though i'll be taking all sorts of pictures when i start doing the swap. Then I have too be patient and break the clutch in and then too the dyno and track!

[dannymax88]

i know u probably wont lik ethe numbers on how much u spent on just the engine but how much did u spend on it lol

[slotec95]

thats a lot of stuff but i will still beat it with a f22! Maybe spend a little more money!

[2DrAccord]

wow, diggin up an old post. So are you just looking to start an e-war? Or are you saying you could beat my h22a with your f22? I hope your boosting if that's what your saying. Or are you saying that you COULD build an f22 too beat it. Cause if that's what your saying i could build a geo metro that would own your f22 and my h22. And if we are just speculating if i built the bottom end and just threw on a basic turbo kit and a little bit of boost where would that f22 be then? Heck, even a 50 shot on this motor would give that f22 your talking about a run.

[mahBLACKaccord]

wow, diggin up an old post. So are you just looking to start an e-war? Or are you saying you could beat my h22a with your f22? I hope your boosting if that's what your saying. Or are you saying that you COULD build an f22 too beat it. Cause if that's what your saying i could build a geo metro that would own your f22 and my h22. And if we are just speculating if i built the bottom end and just threw on a basic turbo kit and a little bit of boost where would that f22 be then? Heck, even a 50 shot on this motor would give that f22 your talking about a run.

HAHA..........

[ghostmill]

Heh yea a sleeper..Im sure you didnt order these all at once riight? Your list is preety long as of now.. and your onli guessing about 7grand eh. Thats not to bad if you ask me. But hey.

[2DrAccord]

the tally's gone up a little bit now. I've doen full brake up grades better tires, and some other goodies. I would say i'm just under 8 right now. I didn't order everything at the same time. I ordered it throughout my deployment. I wanted it all waiting for me when i get back home. Here's a list of everything that i've done since then.
Here's a list of my mods
1997 accord "lx" coupe
h22a w/lsd tranny
boomslang obd1 conversion harness
p13 ecu
injen intake
hondata heatshield
rage "mild" header w/2.5" collector
kteller 2.5" flex pipe
2.5" custom exhaust
2.5" buschur racing high flow cat
skunk2 cam muffler
skunk2 cam gears
unorthodox racing p.s and alt. pulley's
unorthodox racing underdrive crank pulley
crane cams coil
crane cams external coil conversion
msd 8.5 wires
hasport h22 adaptor mount
solid front motor mount
moroso oil pan
moroso oil pickup tube

Suspension/wheel/tire:
eibach sportline springs
koni reds
neuspeed upper front strut bar
suspension techniques sway bar bushing
ex rear subframe swap (the ex has a sway bar in the rear and lx's don't)
specialty products camber kit
giovanni racing 17" rims
pirelli pzero nero 215/45 zr 17's

Brakes:
Sp performance slotted and diamond cut rotors
rear disc conversion
ebc greens front pads
akebono's rear pads
earls steel braided brake line all four corners
dot5 brake fuid

interior/misc.:
tenzo r rally seats
rear seats rehopolsterd to match front seats. (2 1/2" pad added to middle seat to make it a two seater in the rear)
dc sports short shifter adaptor
momo f16 shift knob
momo pedals
prelude shifter conversion
autometer a pillar dual gauge pod
autometer lunar water temp gauge
autometer lunar a/f ratio gauge
old school indelgo gauges only blue and green lol
all clear lenses
tyc jaguar tail lights

exterior:
home made type r grill
(i'm trying for the sleeper look)

[2DrAccord]

thats a lot of stuff but i will still beat it with a f22! Maybe spend a little more money!
so umm.....how much have you spent on your accord? sounds like you've got a little more money in yours then i have in mine. sounds like all you come on the forums and do is talk junk.

[H22accord]

yeah i agree

[jbaccord]

2Dr, Why bother wasting time with this punk? All he can do is "Sing it, not bring it." Are you planning on doing an Intake Manifold swap? If so, I would reccomend a Euro-R of Type S unit. I opted for the Skunk2 and have brake booster clearance problems. Quite happy with the performance but figuring out a permanent solution to this issue has eluded me so far. Did you get those regrinds you were considering yet? One of these days we'll figure out who can inch the other one out.

[sleepy_accord]

This guy is a e-tard trying to start an e-war with his e-thuggery when he's missing an e-chromosome...........see the other post in racing section........oh and i see he's in greenville, that's nice i have a few friend in greenville and it isn't too far maybe he could provide us with some pictures of this *beast* of an accord..........oh yeah and drag is the retarded step child of the turbo world.:thumbup:

[2DrAccord]

nah, haven't picked up the regrinds yet. Very very soon though. I just had to replace my iac and my o2 sensor. That set me back about 350 bones. I've also got to figure out why my fans aren't working anymore. I think that it's my radiator fan switchs. IF thats the case thats another seventy from autozone for the both of them. then i've got to do ball joints and tie rod ends all the way around. After that i'm free too do my cams, hondata, and throttle body. I finally did install my aeromotive fpr, aem fuel rail, and my walbro pump. So things are going pretty good.
Speaking of the skunk 2 manifold. I've heard nothing but bad things about it. I'm really wanting to do the euro r conversion, but it's incredible difficult to find the manifold.

[Zapman]

2DrAccord,

Got any pic's yet ??????

[jbaccord]

I have no complaints about the Manifold besides clearance issues and thats a 50/50 street in my mind. Both Honda's and Skunk2's fault. It is after all a true race Manifold and you lose the EGR and one other thing thats slipping my mind at the moment. So its not a mod for those who have to worry with Emmisions. Throttle response is great but thats the TB not the manifold. However I can feel, hear this manifold just gulping all the air I can give it which is nice. I have a ECT sensor to replace and then its a P28 reflashed by Skunk2, and an aftermarket LSD for this project. Your fans won't work and mine won't shut off; go figure. I swore I saw KTeller selling the Manifold not long ago but can't find it now. I was waggering on one from Ebay which already had some of the conversion work done but missed out on it. I feel you on the impossible to find bit.

[2DrAccord]

yea, man i have alot of pics. I posted them here a while ago lets see if i can find them.

[2DrAccord]

javascript:ShowImage('/member_pages/show_image.pl?image=http://memimage.cardomain.net/member_images/5/web/2057000-2057999/2057979_5_full.jpg', 575, 461)

[2DrAccord]

http://www.cardomain.com/ride/2057979

[97 2 door accord]

nice ride looks like your almost done ya? good luck with the rest

[2DrAccord]

yeah, i'm almost there. I'm withing about 2k of being where i want the car too be. thanks for the compliment. i don't plan on putting a kit or anything on it. i'm going to get another set of rims, and call it a day for the exterior.