PDA

View Full Version : Foglight wiring


anasowner
02-09-2005, 07:12 AM
can anyone give me a simple DIY how to adapt aftermarket foglights to work with a facotry accord foglight switch? I have an LX and didnt come with fogs...

I heard something about relays and other things.....i just really i guess need the basics, what kinda relays you guys used, where you took power from, grounds...

Ricanstylz00
02-09-2005, 01:09 PM
Its really kinda simple. Route the power wire to either your battery or fuse panel box under the hood. Ground the grounding wire to the chassis somewhere. Pull the wires through a grommet in the firewire on the driver's side. I've never used a Honda factory fog light switch, but I would assume that it is similar to install it as it is with an aftermarket switch. I put fog lights on my civic once, took about 30 min. from pulling everything out of the package, to securing the lights, to wiring the connections, to complete operation.

anasowner
02-19-2005, 02:38 PM
where's the grommet you put the wires through? anyone have any pics?

Ricanstylz00
02-19-2005, 03:38 PM
If your looking at the front of your car, it on the firewall to the right on the drivers side probably about 14 inches or so from the top of the engine bay. I could take a pic and show you, but my digi cam is at work. You might be able to find it from the inside of your car. Stick your head underneath the drivers side dash area and pull back the carpet a little bit. Check about 5 to 6 inches above the brake pedal and you might be able to see it from there.