New Cailbers (LOTS OF PIX)

[5peedCoupe]

hehe.. JK.. but i did do something new just before the new years.. it took me two nites to do it.. i had to sand of 10+ years of brake dust.. but lucky i had theses.. also i had to use two cans.. cuz i got trigger happy .. u knoe.. second time using spray paint.. first time was diy jdm headlites and its racing red $7.99 a can.. but hte pix shows it kinda orange but its the flash and its really red..

http://photothru.com/photo_filedb1/A6/17/C2/A617C2/viewable/A617C2_131F0B860A1_4.jpg

that jack stand was der for back up and it wasnt holding the rear car up
http://photothru.com/photo_filedb1/A6/17/C2/A617C2/viewable/A617C2_131F0B860A1_1.jpg

http://photothru.com/photo_filedb1/A6/17/C2/A617C2/viewable/A617C2_131F0B860A1_3.jpg

[5peedCoupe]

getto rig stand while i paint every angle of the mounting bracket.. hehe
http://photothru.com/photo_filedb1/A6/17/C2/A617C2/viewable/A617C2_131F0B860A1_5.jpg

pass rear
http://photothru.com/photo_filedb1/A6/17/C2/A617C2/viewable/A617C2_131F0B87EC8_1.jpg

driver rear
http://photothru.com/photo_filedb1/A6/17/C2/A617C2/viewable/A617C2_131F0B87EC8_2.jpg

[5peedCoupe]

both rears
http://photothru.com/photo_filedb1/A6/17/C2/A617C2/viewable/A617C2_131F0B87EC8_5.jpg

driverside rear
http://photothru.com/photo_filedb1/A6/17/C2/A617C2/viewable/A617C2_131F0B87EC8_3.jpg

pass side rear
http://photothru.com/photo_filedb1/A6/17/C2/A617C2/viewable/A617C2_131F0B87EC8_4.jpg

[5peedCoupe]

driverside front
http://photothru.com/photo_filedb1/A6/17/C2/A617C2/viewable/A617C2_131F0B81B6E5_1.jpg
http://photothru.com/photo_filedb1/A6/17/C2/A617C2/viewable/A617C2_131F0B81B6E5_2.jpg
http://photothru.com/photo_filedb1/A6/17/C2/A617C2/viewable/A617C2_131F0B81B6E5_3.jpg

[5peedCoupe]

pass front
http://photothru.com/photo_filedb1/A6/17/C2/A617C2/viewable/A617C2_131F0B81B6E5_4.jpg
http://photothru.com/photo_filedb1/A6/17/C2/A617C2/viewable/A617C2_131F0B81B6E5_5.jpg

driverside front with wheels
http://photothru.com/photo_filedb1/A6/17/C2/A617C2/viewable/A617C2_131F0B81B6E5_9.jpg

[5peedCoupe]

yea i knoe ders a little over spray but u cant see once wheels are installed.. not bad.. but make sure u clean and sand them off pretty good or else paint wont stick.. take ur time and tape off and cover up any and everything u dont want paint over spray onto.. like hte ground and all the parts under the car..

[5thGenLX]

nicely done it looks good, i'm going to be doing that but black on my front cals and rear drums as soon as i can find a some good black paint and something to remove the rust.

[AccordEx]

Looks nice, good job

I was thinking of doing mine in black or blue when I get some new rotors.

[jdmaccordbo!916]

looks good nowyou need to upgrade the rotors.... you can get a pair of the EBC for like $150. well that is what i paid for my slotted an crossdrilled ones.... an i had the red calipers like that as well... good job yo....

[jbaccord]

There are several differnt kits for doing this job. I used the brush-on kit from Wal-Mart. I think I spent a whole $15 on it, enough cleaner, paint, and tape for all four Calipers and or drums. All the colors you all have mentioned are available. I would recomend getting a second brush however; thick paint and it sets quick.