corner lights

[jose_1984]

I have a 91 honda accord and I want to put corner lights but it is hard to take the bottom screw off. do you know how to remove it?

another ? do I need to put a orange bulb on the corner lights or can I leave it white or can I put a blue bulb? that would look awsome.

[mark986]

Bottom screw? On mine there's the one black screw on that white arm that holds it in place. To get mine off, I simply removed the screw pulled the lense and gave it an extra push from that arm to get it out. If you have clear corners you can put any color of bulb you want as long as it's the right size. I have zenon bulbs in mine. If your corners are stock, the signal will still be orange.

[ACCORDICT]

I think the bottom screw is the adjustment screw in the back to adjust flushness?????, mine we're f*ed up so i got it to look right then glued in the screw permentally, hope thats what youre talking about...As for the colors In OR. you cannot have the blue lights, but I have only had a problem during the day, because at night the natural glass blue shines' white....But in my red/clears I have natural glass blue in there and have had problems because they are way bright. But I think that was just an excuse to pull me over to see in the car....I didnt get a "fix-it" ticket....

[91SEeinblue]

There is only one screw to remove the corner lights (on my 91 at least..maybe its different for the 92+). But the top screw just comes straight out, and then take a flatblade screwdriver and lightly (as to not scratch or dent the fender) pry it forwards (towards the front of the car) straight out of its "groove." Sorry if thats a little confusing, but it literally just pops out when you pry it out lightly. Also, when it starts to budge, it will sound like the plastic is cracking (maybe not..but it did on mine) but that was just the water that had gotten in there and frozen ( a little cold in chicago nowadays). Hope this helps.

[mark986]

Yeah like I said before, I only have one screw too. You don't need to use a screwdriver or anything. Just push from inside and pull from the outside. Don't pull too hard so you drop yank out the wires connected to it.

[91accordse]

how do you remove the bumber lights in the front lower bottom on a 91 accord

[Asiandude03]

on the inside of the bumper lense there is a small little whole with a screw. Shine a flash light into it and you will see what I mean. That screw will take off your bumper lense.