JDM headlight Installation 96 honda accord

[gfbk4life1]

I got my JDM lights and now im trying to get those sunsa you know who in.
I took out my stock ones and that was a pain, i was just wondering if I need to take off my from Bumper? to get them in

[jdmaccordbo!916]

yes you do have to remove the front bumper to install the lights.. there are two bolts at the bottom of the lights that you have to install an one on each side as well as the two on top...(in all six)... an then obviuosly the side corner lights go on after wards... if you have the true stanley jdm's like i got, then your lights will be pointing to the left dramaticuly so you will be having alot of ppl flashing you....(well that might be because i used the H4/H1 bulbs..) but imgoing to be trying to figure a way to get them to point to the center instead..

[Carreragt2e]

there are no adjusting bolts for the lights? The stock head lights have those bolts that let you move them up and down, then I bet if you have some one push on the light housing alittle while you screw it down it will help you eliminate the lights shinning all the way to the left somewhat.

eric